Bobcat T300 and mini excavator on a Fallbrook hillside

Our work

The machines, on the job

Drone and ground-level video from a weed abatement job, plus photos from grading work around Fallbrook. More added as they come off the phone.

$150 per hour • 4-hour minimum • Operator and fuel included • Insured

The videos are one weed abatement job from three angles: a drone following the Bobcat T300 and the brush cutter along the fence line, the same machine from straight above cutting stripes through dry grass, and a phone clip from the trailer deck with the sound of the cutter. The photos are grading work: a hillside lot in Fallbrook with the T300 and the mini excavator, and the trailer that brings both machines to your gate.

Every job on this site, pad grading, land clearing, trenching, driveway grading, drainage and concrete removal, is billed at $150 per hour with a 4-hour minimum, operator and fuel included. The service pages list typical hours for each; the pricing page lists all of them in one place.

Videos

Press play on any clip. Nothing downloads until you do.

Weed abatement on a vacant lot, from the air

The Bobcat T300 with the brush cutter takes a lot of waist-high dry grass and mustard down to stubble between the neighbors' fences. Drone footage of the pass along the hedge, then the whole cleared lot: mowed rows, no fuel against the houses, ready for the fire inspection.

The brush cutter from straight above

Straight-down drone view of the T300 cutting stripes through dry weeds. Each pass is a little over six feet wide, and a lot this size takes a morning. The wide shots at the end show the finished field against the road and the houses next door.

From the trailer: before and after in one clip

Shot from the trailer deck at the edge of the lot. Chest-high foxtails and dry mustard on the way in, the T300 mowing through it with the brush cutter, and the cut field behind it. This is what fire-season weed abatement looks like at ground level, sound included.

Photos

Bobcat T300 compact track loader and mini excavator grading a hillside pad in Fallbrook
Cutting a pad into a Fallbrook hillside with the T300 and the mini excavator.
Bobcat T300 chained down on the trailer with a brush cutter attachment
The T300 loaded with the brush cutter, headed to a fire clearance job.
View from the mini excavator cab across a freshly graded hilltop pad to the Bobcat T300, with avocado groves and hills behind
From the excavator seat: a hilltop pad cut and leveled that morning, the T300 finishing the grade, groves on every hill behind it.
Brush cutter on the front of the Bobcat T300 facing a field of dry brush with terraced avocado groves on the hills beyond
Brush cutter down and ready: an overgrown parcel below the groves, cleared to bare ground by the end of the day.
Bobcat T300 brush cutter mowing a fire break up a steep chaparral hillside
Cutting a fire break straight up the hillside. Tracks hold on a slope like this where a wheeled machine would not get traction.
Cleared fire break trail running downhill through chaparral toward avocado groves, seen over the brush cutter
The finished break: a clean strip through the chaparral, wide enough for a truck, with the groves and the valley opening up below.
Tracked loader with a brush grapple chained down on a tilt trailer on a dirt road
Loaded and chained: a tracked loader with a brush grapple on the tilt trailer, headed out to a clearing job.

Want yours here?

Send a photo of the problem. We send back hours and a price, and after the job you get the after photo.

$150 per hour. 4-hour minimum. Operator and fuel included.

Text a few photos and you will have hours and a price the same day.

Call Text